I have external push buttons for jog increment and I'm trying for example to update halui.axis.x.increment with the value 0.001
conv_bit_float seems like it should work for this?
It's not obvious how I get the float value of 0.001, assigned to the float value?
Error is postgui.hal:202: Pin '0.001' does not exist
The external button is updating net jog-inc-1 when I push the button (observed in Hal show)
Excerpt from postgui is as follows:
loadrt conv_bit_float count=1
addf conv-bit-float.0 servo-thread
net jog-inc-1 <= arduino.keypad.Jog-Inc-1
net jog-inc-1 => conv-bit-float.0.in
net jog-inc-1f conv-bit-float.0.out 0.001
