[Solved] Classic Lader doesn't run E-stop

5 years 8 months ago #197390 by aleksamc

[Solved] Classic Lader doesn't run E-stop was created by aleksamc

In the postgui.hal I connected such pin:

Code:

net estop-ext classicladder.0.out-00 =>  iocontrol.0.emc-enable-in

But when out-00 is TRUE, machine is disabled.
Why I don't understand. I'm only move pin from hardware input to classiclader output.

Please Log in to join the conversation.

5 years 8 months ago #197526 by aleksamc

Replied by aleksamc on topic Classic Lader doesn't run E-stop

Nevertheless of emc-enable-in is true,
iocontrol.0.user-enable-out is FALSE.
What make iocontrol be deactivated?

Please Log in to join the conversation.

5 years 8 months ago #197536 by aleksamc

Replied by aleksamc on topic Classic Lader doesn't run E-stop

problem was solved. Answer is here

Please Log in to join the conversation.

Time to create page: 0.100 seconds