Support for G74, G72 and G71

Hi

I'm a happy user from LinuxCNC with my lathe! I works stable and fast.
Sometimes i don't use cam,for the generation of my tool path.

It would be nice if there is in the future native support for G74, G72 and G71!

Is it possible to implement this in LinuxCNC?

Regards
NonkelDW

Yes, it is possible.

It is actually available in a development branch, and it is also possible to add it to the standard released version as a G-code remap.

Documentation here (search for G71)
github.com/LinuxCNC/linuxcnc/blob/andypu...src/gcode/g-code.txt

I do hope to add it to the released version eventually.

Note that G71 and G72 are now integrated into master / 2.9