Hyundai 18s hit sinumerik 840c

More
6 years 4 days ago #187358 by Torus13
Hyundai 18s hit sinumerik 840c was created by Torus13
Im having huge trouble with my cnc lathe:
Hyundai 18s hit on sinumerik 840c simodrive 611
Lot of plc problems etc im wondering what is The cost of retrofiting it to linuxcnc can i use old parts like main motor or servos? Is it hard to make machine and set it good with tailstock and turret?

Please Log in to join the conversation.

More
6 years 4 days ago #187369 by aleksamc
Replied by aleksamc on topic Hyundai 18s hit sinumerik 840c
From my experiance, retrofiting to linuxcnc is the best decision if looking on price. Also it very quailty and functional. You can leave old drives and connect linuxcnc to them. You need to study manual to your servos at first and to see what signals they are controlled. You can configure turret and tailstok also.

Please Log in to join the conversation.

More
6 years 4 days ago #187383 by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
What is average price od this retrofit on old drivers?

Please Log in to join the conversation.

More
6 years 4 days ago #187394 by Aciera
Replied by Aciera on topic Hyundai 18s hit sinumerik 840c
Are these the same drivers?

forum.linuxcnc.org/30-cnc-machines/38108...i25-7i77-orion-pd200

Please Log in to join the conversation.

More
6 years 4 days ago #187396 by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
Look like this is photo of cabine and servos used

Please Log in to join the conversation.

More
6 years 4 days ago #187398 by Aciera
Replied by Aciera on topic Hyundai 18s hit sinumerik 840c
So looks like those drives take a 10V Signal that would certainly be possible with a Mesa board do you know what kind of encoders are used?

Please Log in to join the conversation.

More
6 years 4 days ago #187399 by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
I cant find them where they may be placed on back of motors?

Please Log in to join the conversation.

More
6 years 4 days ago #187404 by Aciera
Replied by Aciera on topic Hyundai 18s hit sinumerik 840c
Probably. I guess they feed into the drives but I'm not sure. Do you have schematics for the wiring of the machine?

Please Log in to join the conversation.

More
6 years 4 days ago #187406 by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
Yes i will search

Please Log in to join the conversation.

More
6 years 4 days ago #187407 by Torus13
Replied by Torus13 on topic Hyundai 18s hit sinumerik 840c
Those ones?

Please Log in to join the conversation.

Time to create page: 0.063 seconds
Powered by Kunena Forum