Gildemeister NEF 480 Retrofit

More
5 years 7 months ago #200838 by andypugh
No eBay APP ID and/or Cert ID defined in Kunena configurationToo late, but there are some relatively cheap indent crimpers on eBay / Amazon that can do those terminals.

I have ended up with two, one for the little pins in Lemo connectors and one for the M23 connectors.



As an example.

Please Log in to join the conversation.

More
5 years 7 months ago #200912 by JimPanski
Hi Andy,

may I ask wich one you are using for the M23 connector pins?

Please Log in to join the conversation.

More
5 years 7 months ago #200917 by andypugh

JimPanski wrote: may I ask wich one you are using for the M23 connector pins?


I am using this particular one:
www.amazon.co.uk/gp/product/B007G5QAVU/r...=ATYMR08ODFL16&psc=1

Please Log in to join the conversation.

More
5 years 7 months ago #201139 by anfänger
Made some progress this evening. The retainers of the carriage are cleaned and attached. Also I reattached s as bd rewired the cross sled limit switches:

[img


[img


[img


Still waiting for the new oilers to arrive. But there is more than enough I can do while waiting for them to arrive

Please Log in to join the conversation.

More
5 years 7 months ago #201331 by anfänger
not much progress since Friday. It's cold in the shop.

I remounted the first limit switch on the carriage. The second needs a lite mit more care

[img


So I took a look at the cabinet an realized that the cables from the connectors weren't numbered, So skipped the idea of connecting them directly and Gabe them an extra wiring terminal.

[img


Not yet finished but enough for today.

Please Log in to join the conversation.

More
5 years 7 months ago #201358 by tommylight
Very nice progress, despite the cold.
It was sunny today so also got some work done, but the moment the sun went over the mountains it got very cold ! :pinch:

Please Log in to join the conversation.

More
5 years 7 months ago #201395 by anfänger
You know it’s cold when you need a hear gun to warm up the rubber seals to be able to get the cable trough.

I am looking forward to a bit warmer weather.

Please Log in to join the conversation.

More
5 years 7 months ago #201399 by J Green
Seems as if the cold bothers me more the older I get .

To heat soak equipment , used to make 3/4 inch electrical tube frame and cover it with plastic 50mil thick building foil wrap . Was cheap and easy to drape over the temporary metal tube frame . Added electric heater and a fan . Can also be used for spray painting booth .

When it's freezing don't lick flag poles
Bob

Please Log in to join the conversation.

More
5 years 7 months ago #201406 by tommylight
Last two winters were mild here so not much of pole licking going on. :)

Please Log in to join the conversation.

More
5 years 7 months ago #201407 by anfänger
The mean thin is thee weeks ago we hat -10° two weeks ago 18° So now I think it should be warm when it’s sunny outside but it is 0°.
And I am getting old and start complaining about everything...

Please Log in to join the conversation.

Time to create page: 0.185 seconds
Powered by Kunena Forum