Gildemeister NEF 320 upload file question

More
5 years 9 months ago #197004 by yoshimitsuspeed
Gildemeister NEF 320 upload file question was created by yoshimitsuspeed
Not linuxcnc related but I figured if anyone knew an answer someone here might.
We just got a Gildemeister lathe and it was recommended that we use Cimco edit to upload files. We don't really need the editor function or anything. I was wondering if anyone knew of an open source alternative?

Please Log in to join the conversation.

More
5 years 9 months ago #197006 by andypugh
Replied by andypugh on topic Gildemeister NEF 320 upload file question
Maybe winder.github.io/ugs_website/

(GPL 3.0 according to the github)

Please Log in to join the conversation.

More
5 years 8 months ago #197492 by yoshimitsuspeed
Replied by yoshimitsuspeed on topic Gildemeister NEF 320 upload file question
Thanks
I did come across that one and tried it but didn't get a successful file transfer. There is a decent chance I just didn't have settings correct or something.

Please Log in to join the conversation.

Time to create page: 0.242 seconds
Powered by Kunena Forum