LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

1 year 9 months ago #319374 by Hobbymate

Replied by Hobbymate on topic LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

Very helpful community. No one say truth about Linux CNC is never working you need all time do development.

Please Log in to join the conversation.

1 year 9 months ago #319375 by tommylight

Replied by tommylight on topic LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

LinuxCNC is very good, and it always, always works.

Please Log in to join the conversation.

1 year 9 months ago #319381 by Hobbymate

Replied by Hobbymate on topic LinuxCNC 2.9 vs. 2.8 Using A-Axis for ATT

It's working in velocity mode. I can't get it to work with one sensor and position mode. Please advise.

Please Log in to join the conversation.

Time to create page: 0.037 seconds