7I73 Pendant/control panel interface

More
13 years 10 months ago #27165 by PCW
Replied by PCW on topic 7I73 Pendant/control panel interface
OK _correct_ 4i65 svss4_8 is available from freeby.mesanet.com/4i65_svss4_8.zip

Please Log in to join the conversation.

More
13 years 10 months ago #27325 by marv-t
Replied by marv-t on topic 7I73 Pendant/control panel interface
Hello!

Now the 7i73 is working. I connected a MPG and it works properly.

Only one question left: How can I access the analog input( IN 0..3)?

This is very helpfully for spindle and feed overwrite,

Thanks a lot for the corrected firmware.

Thomas

Please Log in to join the conversation.

More
13 years 10 months ago #27329 by PCW
Replied by PCW on topic 7I73 Pendant/control panel interface
To read the analog inputs, you need to set the 7I73s mode to 1 or 2
that is include:

sserial_port_0=1xxxxxxx in the config line

(assuming the 7I73 was on channel 0)

Please Log in to join the conversation.

More
13 years 10 months ago #27334 by marv-t
Replied by marv-t on topic 7I73 Pendant/control panel interface
Thank you very much!

Now I know how to setup the sserial cards.

Thomas

Please Log in to join the conversation.

More
13 years 10 months ago #27335 by PCW
Replied by PCW on topic 7I73 Pendant/control panel interface
BTW, This information is in the (very large) hostmot2 man page

Please Log in to join the conversation.

More
2 years 7 months ago #296575 by hardware_crash
Replied by hardware_crash on topic 7I73 Pendant/control panel interface
Hello Peter,

I know this is a very old post, but I had to setup a new pc for my machine which used the 4i65_svss4_8.bit file and the download (freeby.mesanet.com/4i65_svss4_8.zip ) seems to be unavailable.

Any chance you could reupload the 4i65_svss4_8.bit file?

Thanks in advance

Please Log in to join the conversation.

More
2 years 7 months ago #296579 by PCW
Replied by PCW on topic 7I73 Pendant/control panel interface
 

Attachment not found

Please Log in to join the conversation.

More
2 years 7 months ago #296582 by hardware_crash
Replied by hardware_crash on topic 7I73 Pendant/control panel interface
Thank you for the fast response.

It seems that I have a similar error as marv-t had before:
SSerial is the same as in my old config: sserial_port_0=00000000

dmesg output:
Code:
hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 4i65 at 0000:02:00.0 hm2/hm2_4i65.0: Low Level init 0.15 hm2/hm2_4i65.0: inconsistent Module Descriptor for Smart Serial Interface, not loading driver hm2/hm2_4i65.0: Version = 0, expected 0 hm2/hm2_4i65.0: NumRegisters = 6, expected 6 hm2/hm2_4i65.0: InstanceStride = 0x00000010, expected 0x00000040 hm2/hm2_4i65.0: MultipleRegisters = 0x0000003C, expected 0x0000003C hm2/hm2_4i65.0: inconsistent Module Descriptor! hm2/hm2_4i65.0: failed to parse Module Descriptor 4 hm2_4i65.0: board fails HM2 registration RTAPI_PCI: Unmapped 65536 bytes at 0x7f7f4d583000 Driver probe function failed! hm2_pci: error registering PCI driver hm2_pci: rtapi_app_main: Operation not permitted (-1)

Please Log in to join the conversation.

More
2 years 7 months ago #296584 by PCW
Replied by PCW on topic 7I73 Pendant/control panel interface
OK that must be the same one I have

I'll have to re-make it but that needs an older version of ISE
which I don't have at home so I can only do it Monday at work.

Please Log in to join the conversation.

More
2 years 7 months ago #296845 by PCW
Replied by PCW on topic 7I73 Pendant/control panel interface
This should be OK:

 

Attachment not found


 

Please Log in to join the conversation.

Time to create page: 0.178 seconds
Powered by Kunena Forum