Which board to buy?

I've started designing my board using Eagle, as it has an inbuilt G Code generator. Hopefully have it finished today!

cheers, Scott

Here are some (poor) images of my machine:

Cross-slides to make X/Y table:


Gear on spindle to be used as Phonic Wheel for spindle speed feedback.


No1 Morse Taper in spindle with 6mm collett (pulled in by M6 Drawbar through spindle)


Faceplate and 3 Jaw chuck with Whitworth thread fit on spindle nose.

Since I'm now on the throws of designing my own boards, I'll start a new topic for board design discussion.

Thanks for all the help so far!

Cheers, Scott

We were talking Drummonds on the IRC. How did this turn out?