5i25 + 7i77 Plug n Go PROBLEM!

More
10 years 11 months ago #64939 by PCW
Replied by PCW on topic 5i25 + 7i77 Plug n Go PROBLEM!
Well the firmware looks correct, hmm

CR15 and CR16 are both illuminated


This should never be (red and green at once) unless the card is jumpered for setup mode

did you move the setup/operate mode jumpers?

Please Log in to join the conversation.

More
10 years 11 months ago #64941 by Sousanator
Replied by Sousanator on topic 5i25 + 7i77 Plug n Go PROBLEM!
Yes for some reason I thought that would be necessary. Well, that issue is gone, but now I'm getting the same error about "scale.spindle.gain". Sadly I don't have any time to look into it as I must go to work!

Please Log in to join the conversation.

More
10 years 11 months ago #64945 by PCW
Replied by PCW on topic 5i25 + 7i77 Plug n Go PROBLEM!
Well that's a hal file error of some type, not related to hardware

Please Log in to join the conversation.

Time to create page: 0.051 seconds
Powered by Kunena Forum