Simple UART on Mesa 6i25 with 5i25 firmware

See also:
forum.linuxcnc.org/forum/24-hal-componen...er-on-mesa-5i25-6i25

sirop wrote: I prepared PktUART for machinekit: see the latest commits beginning from github.com/sirop/machinekit/commit/3446d...ee7211f94f1a1a2462d5 .

Would you be willing to create a patch for linuxCNC?

andypugh wrote:

sirop wrote: I prepared PktUART for machinekit: see the latest commits beginning from github.com/sirop/machinekit/commit/3446d...ee7211f94f1a1a2462d5 .

Would you be willing to create a patch for linuxCNC?

Before doing PR to machinekit or LinuxCNC I wanted to test the driver also on 1 Mps.
I'll receive the converter on Friday in the worst case.

And then - in a week or so - I'll do also a patch for LinuxCNC.

andypugh wrote:
Would you be willing to create a patch for linuxCNC?

I uploaded github.com/sirop/linuxcnc-playground/com...af5faac9d90ae9811ebb
The build was tested with
I do not know however how to make a PR to github.com/LinuxCNC/linuxcnc
as github forwards me to my machinekit fork.