Disabling servo amps.

PCW
Offline
Platinum Member

10 years 4 months ago #75887 by PCW

Replied by PCW on topic Disabling servo amps.

you can verify that hm2_5i25.0.7i77.0.1.analogena toggles
(with halmeter or show hal configuration --> "watch")

If the OPTO is fried it will likely just be always open
you can check safely with an Ohmmeter

Please Log in to join the conversation.

sliptonic
Topic Author
Offline
Premium Member

10 years 4 months ago #76294 by sliptonic

Replied by sliptonic on topic Disabling servo amps.

Finally found the last loose connection. Thanks everyone!

Please Log in to join the conversation.

Catch22
Offline
Elite Member

6 years 8 months ago #158311 by Catch22

Replied by Catch22 on topic Disabling servo amps.

I am in the process of doing the same thing except my drives are a bit bigger,25a20 AMC drives, could you point me in the right direction on what relay I should get and what size of diode.
Thanks Mike

Please Log in to join the conversation.

Time to create page: 0.041 seconds