Hi Driver, board help

No eBay APP ID and/or Cert ID defined in Kunena configurationHi i am music player. I like cnc routers. I would like to make some cnc tool some day in future.(hope nearest future).
After some googling i decided to ask here...
I need quick answer from You pro`s.

I`m offered nema 23 steppers for good price but they are 5 phase (not from that site... but that model), so...

Can i use this motor manamotor.ir/product/210479
with this driver www.google.com/url?sa=t&rct=j&q=&esrc=s&...IT6IwXQRG-_e0qI6bhdg
and all with this board


or some other cheap mach 3 controller or arduino+some shield or something else... ?

Need quick answer because seller have other offers...
Thanks ,
Cheers..

How does the current rating of the motors compare to that of the drivers?

According to a spec sheet I found on the web (attached) the drives are good for 1.4A / phase.

That is a nice price on those drives, but i would advice to stear clear of 5 phase setups that are not a turn key option. It is not easy for begginers to figure out the wiring and those drives have plenty of options on them.
So however cheap they may seem, it is much better to get 2 phase motors and drives, and there are plenty of cheap bundles on the net.

thanks you both, for quick replay. ( @andypugh -i dno how???)
Anyway, my question is , is it possible (or some other driver you sugest.)
Now is time to buy this motors dirt cheap if they can be used in diy cnc project???
Cheers

@andypugh
www.google.com/url?sa=t&rct=j&q=&esrc=s&...5DflnhwF8A314fBqVyMw

csd this model 0.75 A/P check it please

I have heard that 5-phase steppers have some advantages, but maybe harder to make to work.

thank you,
This is an update pic from the seller but i dont know what electronic to chose. Can you "decode" this image and tell me what is for this big(23) nema motors (model is in my previous post)?


and what are the "?" marks?

another one : What is this board, do i need this?

Are the Slo-Syn motors definitely steppers? They look slightly servo-ish.

No idea what the big card is. Is there a makers name?

One of the detail pictures shows 5-phase drivers. These can only be used with 5-phase motors, which are only made by one company - Oriental Motor, under license from Berger-Lahr. These are not compatible with other 2-phase stepper motors.

As the seller told me all parts on pictures (and many more) are from some expensive big format photo printer.
I googled a lot about those industrial parts. There are almost no wiring diagrams,or other useful schemes about these motors, drivers, ect.
So i decided to go "easier" path with 2/4 phase stepper/drivers. That is very well documented and well known topic here, and on other cnc/ 3d print communities.
Thank You all.
P.S. The seller sold everything from pic 1 meanwhile, so another reason, to buy something else.

Those are from photocopiers, they look like 5 phase motort and drives, so they are most probably specialy made for that purpose. All that i have are specialy purposed with their own controllers and some of them have separate current limiters. To date i have not seen any 5 phase that can be controlled by step/dir or up/down or quadrature signals. On the other side i had some 3 phase steppers and drives with step/dir and microsteping and enable signals.
Information above pertains to drives from photocopiers.