Longsmotor Driver DM860A

MarcoGaspar
Topic Author
Offline
Premium Member

9 years 8 months ago #87419 by MarcoGaspar

Longsmotor Driver DM860A was created by MarcoGaspar

Hello,

Does anyone knows the linuxcnc driver timing settings for Longsmotor Driver DM860A with nema 34 ?

Best Regards,
Marco Gaspar

Please Log in to join the conversation.

rodw
Offline
Platinum Member

9 years 8 months ago #87443 by rodw

Replied by rodw on topic Longsmotor Driver DM860A

I'm using these settings on a Longs Motor DM542a driver. A few people have said 1500 is way to short and use 2500 or 3000 but it is working fine with my Mesa 7i76e so maybe start a bit higher than what I've used.

Code:

DIRSETUP   = 500
DIRHOLD    = 500
STEPLEN    = 1500
STEPSPACE  = 1500

Please Log in to join the conversation.

Time to create page: 0.141 seconds