What bit file for 7i80HD ; 7i33TA ; 7i37TA ; 7i37TA

Hallo,

what bit file should I flash to my 7i80 HD if I need to connect as follows:

P1 : connects to 7i33TA
P2 : connects to 7i37TA
P3 : connects to 7i37TA

I have on the 7i33TA connected 4 Servo drives and 3 encoder feedbacks (spindle has no feedback)
All other stuff is connected to the 7i37TA's

At the moment the machine runs with PC and 5i20, as I have other machines running with 7i76E I want to use only one Notebook and carry that one from machine to machine.

Thanks for support

Norbert

7i80hd_16_svst4_8.bit is one that would work (just set the stepgens to 0 to free the GPIO on the 7I37 connectors)