5i23 7i49 7i52 8i20

More
9 years 3 months ago #96234 by clematites93
Replied by clematites93 on topic 5i23 7i49 7i52 8i20

PCW wrote: On you HALScope screen shots is the shaft moving back and forth?
If not, something very basic is wrong

is the resolver error bit set?


Yes it's the shots of scope when the shaft is moving back and forth.

No the bit was not set.

Please Log in to join the conversation.

More
9 years 3 months ago #96235 by clematites93
Replied by clematites93 on topic 5i23 7i49 7i52 8i20
Do you think that the firmware is the right one to pilot a 5i23 with a 7i49 and a 7i52 (rmsvss6_8.bit) ?

Please Log in to join the conversation.

More
9 years 3 months ago #96256 by PCW
Replied by PCW on topic 5i23 7i49 7i52 8i20
rmsvss6_8 is for a 7I49 and a 7I44

Please Log in to join the conversation.

More
9 years 3 months ago #96291 by clematites93
Replied by clematites93 on topic 5i23 7i49 7i52 8i20

PCW wrote: rmsvss6_8 is for a 7I49 and a 7I44

Is there a firmware that allows to connect the resolver's signals (through the 7i49) and to the 7i52 to drive the 8i20?

If not what would the right chain for my needs.

Please Log in to join the conversation.

More
9 years 3 months ago #96314 by PCW
Replied by PCW on topic 5i23 7i49 7i52 8i20
I'll make up a 7I49+7I52 bitfile on Monday

Please Log in to join the conversation.

More
9 years 3 months ago #96317 by clematites93
Replied by clematites93 on topic 5i23 7i49 7i52 8i20
Hi,
In advance,thank you very much for your 5i23, 7i49 + 7i52 bitfile;

Please Log in to join the conversation.

More
9 years 3 months ago #96358 by PCW
Replied by PCW on topic 5i23 7i49 7i52 8i20
freeby.mesanet.com/5i23_7i49_7i52.zip

7I49 on I/O 0..23 7I52 on I/O 24..47

Please Log in to join the conversation.

More
9 years 3 months ago #96406 by clematites93
Replied by clematites93 on topic 5i23 7i49 7i52 8i20

PCW wrote: freeby.mesanet.com/5i23_7i49_7i52.zip

7I49 on I/O 0..23 7I52 on I/O 24..47


Thank you for your work but question (of beginner) : unlike other files, (svss6_6s.bit or rmsvss6_8.bit), I could not transfer the file : top9054hostmot2.bit to the directory 5i23

Please Log in to join the conversation.

More
9 years 3 months ago #96408 by PCW
Replied by PCW on topic 5i23 7i49 7i52 8i20
Sorry I forgot to rename the file.
Just rename it to something like 5i23_7i49_7i52.bit and copy it to the /lib/firmware/hostmot2/5i23 directory ( you need to use sudo to do the copy )

Please Log in to join the conversation.

More
9 years 2 months ago #96785 by clematites93
Replied by clematites93 on topic 5i23 7i49 7i52 8i20
Hi,
Again thanks to PCW for his advice.
Otherwise, is there a program, which I could draw inspiration from, to allow the use of 7i49 +7i52 together ?
Thanks in advance :)

Please Log in to join the conversation.

Time to create page: 0.306 seconds
Powered by Kunena Forum