Bit file for Mesa 7i76e with UART?

rodw
Topic Author
Offline
Platinum Member

9 years 1 month ago #99711 by rodw

Replied by rodw on topic Bit file for Mesa 7i76e with UART?

Thanks Peter

That seemed to do the trick. I had to compile mesaflash from source from this repository
github.com/micges/mesaflash

And the following was reported

Code:

hm2_eth: discovered 7I76E-16
hm2/hm2_7i76e.0: created PktUART Interface function hm2_7i76e.0.pktuart.0.
..
..
hm2/hm2_7i76e.0:     IO Pin 012 (P1-09): PktUART Transmit Channel #0, pin TX Data (Output)
hm2/hm2_7i76e.0:     IO Pin 013 (P1-10): PktUART Receive Channel #0, pin RX Data (Input)

Full dump from the terminal below

Warning: Spoiler!

plasma@plasma ~/mesaflash-master/7i76e $ linuxcnc
LINUXCNC - 2.8.0~pre1
Machine configuration directory is '/home/plasma/linuxcnc/configs/Plasma3.10.01'
Machine configuration file is 'Spaceship_Plasma.ini'
Starting LinuxCNC...
Found file(REL): ./Spaceship_Plasma.hal
Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2
hm2_eth: 10.10.10.10: Hardware address: 00:60:1b:10:40:6c
hm2_eth: discovered 7I76E-16
hm2/hm2_7i76e.0: created PktUART Interface function hm2_7i76e.0.pktuart.0.
hm2/hm2_7i76e.0: Smart Serial Firmware Version 43
Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard
Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin
Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin
Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv
hm2/hm2_7i76e.0: 51 I/O Pins used:
hm2/hm2_7i76e.0: IO Pin 000 (P1-01): StepGen #0, pin Direction (Output)
hm2/hm2_7i76e.0: IO Pin 001 (P1-14): StepGen #0, pin Step (Output)
hm2/hm2_7i76e.0: IO Pin 002 (P1-02): StepGen #1, pin Direction (Output)
hm2/hm2_7i76e.0: IO Pin 003 (P1-15): StepGen #1, pin Step (Output)
hm2/hm2_7i76e.0: IO Pin 004 (P1-03): StepGen #2, pin Direction (Output)
hm2/hm2_7i76e.0: IO Pin 005 (P1-16): StepGen #2, pin Step (Output)
hm2/hm2_7i76e.0: IO Pin 006 (P1-04): StepGen #3, pin Direction (Output)
hm2/hm2_7i76e.0: IO Pin 007 (P1-17): StepGen #3, pin Step (Output)
hm2/hm2_7i76e.0: IO Pin 008 (P1-05): StepGen #4, pin Direction (Output)
hm2/hm2_7i76e.0: IO Pin 009 (P1-06): StepGen #4, pin Step (Output)
hm2/hm2_7i76e.0: IO Pin 010 (P1-07): Smart Serial Interface #0, pin TxData0 (Output)
hm2/hm2_7i76e.0: IO Pin 011 (P1-08): Smart Serial Interface #0, pin RxData0 (Input)
hm2/hm2_7i76e.0: IO Pin 012 (P1-09): PktUART Transmit Channel #0, pin TX Data (Output)
hm2/hm2_7i76e.0: IO Pin 013 (P1-10): PktUART Receive Channel #0, pin RX Data (Input)
hm2/hm2_7i76e.0: IO Pin 014 (P1-11): Encoder #0, pin Index (Input)
hm2/hm2_7i76e.0: IO Pin 015 (P1-12): Encoder #0, pin B (Input)
hm2/hm2_7i76e.0: IO Pin 016 (P1-13): Encoder #0, pin A (Input)
hm2/hm2_7i76e.0: IO Pin 017 (P2-01): IOPort
hm2/hm2_7i76e.0: IO Pin 018 (P2-14): IOPort
hm2/hm2_7i76e.0: IO Pin 019 (P2-02): IOPort
hm2/hm2_7i76e.0: IO Pin 020 (P2-15): IOPort
hm2/hm2_7i76e.0: IO Pin 021 (P2-03): IOPort
hm2/hm2_7i76e.0: IO Pin 022 (P2-16): IOPort
hm2/hm2_7i76e.0: IO Pin 023 (P2-04): IOPort
hm2/hm2_7i76e.0: IO Pin 024 (P2-17): IOPort
hm2/hm2_7i76e.0: IO Pin 025 (P2-05): IOPort
hm2/hm2_7i76e.0: IO Pin 026 (P2-06): IOPort
hm2/hm2_7i76e.0: IO Pin 027 (P2-07): IOPort
hm2/hm2_7i76e.0: IO Pin 028 (P2-08): IOPort
hm2/hm2_7i76e.0: IO Pin 029 (P2-09): IOPort
hm2/hm2_7i76e.0: IO Pin 030 (P2-10): IOPort
hm2/hm2_7i76e.0: IO Pin 031 (P2-11): IOPort
hm2/hm2_7i76e.0: IO Pin 032 (P2-12): IOPort
hm2/hm2_7i76e.0: IO Pin 033 (P2-13): IOPort
hm2/hm2_7i76e.0: IO Pin 034 (P3-01): IOPort
hm2/hm2_7i76e.0: IO Pin 035 (P3-14): IOPort
hm2/hm2_7i76e.0: IO Pin 036 (P3-02): IOPort
hm2/hm2_7i76e.0: IO Pin 037 (P3-15): IOPort
hm2/hm2_7i76e.0: IO Pin 038 (P3-03): IOPort
hm2/hm2_7i76e.0: IO Pin 039 (P3-16): IOPort
hm2/hm2_7i76e.0: IO Pin 040 (P3-04): IOPort
hm2/hm2_7i76e.0: IO Pin 041 (P3-17): IOPort
hm2/hm2_7i76e.0: IO Pin 042 (P3-05): IOPort
hm2/hm2_7i76e.0: IO Pin 043 (P3-06): IOPort
hm2/hm2_7i76e.0: IO Pin 044 (P3-07): IOPort
hm2/hm2_7i76e.0: IO Pin 045 (P3-08): IOPort
hm2/hm2_7i76e.0: IO Pin 046 (P3-09): IOPort
hm2/hm2_7i76e.0: IO Pin 047 (P3-10): IOPort
hm2/hm2_7i76e.0: IO Pin 048 (P3-11): IOPort
hm2/hm2_7i76e.0: IO Pin 049 (P3-12): IOPort
hm2/hm2_7i76e.0: IO Pin 050 (P3-13): IOPort
hm2/hm2_7i76e.0: registered

Now I just gotta work out what to do from here but Iknow there are a couple of example components that read and write

Please Log in to join the conversation.

grijalvap
Offline
Elite Member

8 years 8 months ago #105266 by grijalvap

Replied by grijalvap on topic Bit file for Mesa 7i76e with UART?

Can this bit file work with a 5i25 + 7i76,

Please Log in to join the conversation.

PCW
Offline
Platinum Member

8 years 8 months ago #105283 by PCW

Replied by PCW on topic Bit file for Mesa 7i76e with UART?

No, you need a bifile for a 5I25

Please Log in to join the conversation.

nickstewartroc
Offline
New Member

4 years 7 months ago #238189 by nickstewartroc

Replied by nickstewartroc on topic Bit file for Mesa 7i76e with UART?

rodw wrote:
Thanks Peter

That seemed to do the trick. I had to compile mesaflash from source from this repository
github.com/micges/mesaflash

And the following was reported

Code:

hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: created PktUART Interface function hm2_7i76e.0.pktuart.0. .. .. hm2/hm2_7i76e.0: IO Pin 012 (P1-09): PktUART Transmit Channel #0, pin TX Data (Output) hm2/hm2_7i76e.0: IO Pin 013 (P1-10): PktUART Receive Channel #0, pin RX Data (Input) Now I just gotta work out what to do from here but Iknow there are a couple of example components that read and write

Rod, did you end up getting anywhere with this?

Please Log in to join the conversation.

rodw
Topic Author
Offline
Platinum Member

4 years 7 months ago #238195 by rodw

Replied by rodw on topic Bit file for Mesa 7i76e with UART?

No, I never ended up with a hypertherm plasma cutter. I have one acquired for a customer on hand now but the serial port is on backorder.

Please Log in to join the conversation.

Time to create page: 0.043 seconds