7i40 manual issue

More
9 years 1 month ago #99322 by billykid
7i40 manual issue was created by billykid
regarding the encoder selection ttl or rs422

W1 or W6 are on the left hand position, differential mode is selected. page 3

The differential encoder inputs are enabled when W6
(channel 0) or W1 (channel 1) are in the right hand position. page 9

regards
Mauro

Please Log in to join the conversation.

More
3 years 9 months ago #263028 by billykid
Replied by billykid on topic 7i40 manual issue
I wrote years ago but it seems to me that the manual is always like this... which page is right, 3 or 9?

Please Log in to join the conversation.

More
3 years 9 months ago #263030 by PCW
Replied by PCW on topic 7i40 manual issue
page 9 is wrong
(fixed in rev 1.3 manual)

Please Log in to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum