Mesa 7i80 7i76 7i85 bitfile

9 years 1 week ago #100507 by balestrino

Mesa 7i80 7i76 7i85 bitfile was created by balestrino

Hi,
which bitfile i should use for 7i80 + 7i76 and 7i85 boards?

Please Log in to join the conversation.

9 years 1 week ago #100520 by PCW

Replied by PCW on topic Mesa 7i80 7i76 7i85 bitfile

Which 7I80 model?

Please Log in to join the conversation.

9 years 1 week ago #100523 by balestrino

Replied by balestrino on topic Mesa 7i80 7i76 7i85 bitfile

7i80DB-16 + 7i76 + 7i85S

thanks PCW

Please Log in to join the conversation.

9 years 1 week ago #100531 by PCW

Replied by PCW on topic Mesa 7i80 7i76 7i85 bitfile

freeby.mesanet.com/7i80db_16_7i76x1_7i85sx2D.bit

7I76 on J2
7I85S #1 on J3
7I85S #2 on J4

Please Log in to join the conversation.

9 years 1 week ago #100537 by balestrino

Replied by balestrino on topic Mesa 7i80 7i76 7i85 bitfile

Thank you!
where i can find a tutorial on how compile bitfiles?

Please Log in to join the conversation.

9 years 1 week ago #100540 by eFalegname

Replied by eFalegname on topic Mesa 7i80 7i76 7i85 bitfile

balestrino wrote: Thank you!
where i can find a tutorial on how compile bitfiles?

I quot and follow with anxiety :cheer:

Please Log in to join the conversation.

9 years 1 week ago #100550 by PCW

Replied by PCW on topic Mesa 7i80 7i76 7i85 bitfile

Please Log in to join the conversation.

9 years 1 week ago #100592 by andypugh

Replied by andypugh on topic Mesa 7i80 7i76 7i85 bitfile

balestrino wrote: Thank you!
where i can find a tutorial on how compile bitfiles?

wiki.linuxcnc.org/cgi-bin/wiki.pl?Editing_MESA_Bitfiles

(Same page, I think, but an easier-to-recall location)

Please Log in to join the conversation.

Time to create page: 0.500 seconds