LinuxCNC torque readout and mesa cards

8 years 4 months ago #113097 by PCW

Replied by PCW on topic LinuxCNC torque readout and mesa cards

The bitfile is 7i76e_7i76x1_7i74x1D.bit in the support zipfile

Please Log in to join the conversation.

8 years 4 months ago #113098 by andypugh

Replied by andypugh on topic LinuxCNC torque readout and mesa cards

PCW wrote: The bitfile is 7i76e_7i76x1_7i74x1D.bit in the support zipfile

Isn't that Smart-serial on the 7i74? My impression was that the OP wants SSI?

Please Log in to join the conversation.

8 years 4 months ago #113099 by PCW

Replied by PCW on topic LinuxCNC torque readout and mesa cards

Ahh thats right, I have a 7I92 config for this but not 7I76E, I'll cobble one up sometime today:

freeby.mesanet.com/7i76e_7i76x1_7i74x1SSID.bit

Please Log in to join the conversation.

8 years 4 months ago #113131 by dom96

Replied by dom96 on topic LinuxCNC torque readout and mesa cards

Thank you so much for the help

Please Log in to join the conversation.

Time to create page: 0.760 seconds