7i96 Configuration Tool

Oh well, I am probably staying with the CL stepper system I bought, and get servos for my next build later this year. Thanks for the input!

tommylight wrote: Just add:
_not
or
-not
at the end of the 7i96_something_input.000 etc.

tommylight - ref your answer above, the issue i have is the ini and hal files that JohnT's tool produces don't appear to follow 'normal' syntax. for example my ini includes this

but none of this seems to be mentioned in the HAL. I've searched for "INPUT_" and for "Limit" and neither appear in the .hal file. The syntax used (above) in does seem to be conducive to the addition of "_not" or "-not", in fact it specifically says "DO NOT change the input text". I'm at a loss as to how I do something that I thought should be relatively simple. I understand that your answer works in ini.hal files produced by pncconf,

Can they be modified with the tool? Should have "inverted" or "invert" besides every IO pin.

No, not in John's tool, unless he's changed it in the last couple of weeks. Hence asking.

Upload the hal file, please.

Here they are

There are no inputs or outputs set up in the attached hal file.

Thats what I concluded, but that is the hal file that John's tool generated and the switches are definately working, just the inverse of what I want. Could it be more than one hal file is produced and they are in another one?

Did you look in the ini file, inputs and outputs seem to get a mention in there.

The I/O is in io.hal

OK, I'll have to go fetch it from the shed!