Mesa 7i76e Analog Spindle wiring to Servo drive 0-10v

8 years 2 months ago #116215 by Erikcnc

Replied by Erikcnc on topic Mesa 7i76e Analog Spindle wiring to Servo drive 0-10v

Thank you for your reply.

But what if i have 10v? Or is max rpm linkt to max input voltage? For example 50% of max rpm = 50% max input voltage?

Please Log in to join the conversation.

8 years 2 months ago #116216 by PCW

Replied by PCW on topic Mesa 7i76e Analog Spindle wiring to Servo drive 0-10v

if you have 10 V you set the scale to the RPM at 10V

Please Log in to join the conversation.

Time to create page: 0.033 seconds