Hardinge super slant w/ siemens 6RB

More
8 years 1 month ago #116992 by PCW
Replied by PCW on topic Hardinge super slant w/ siemens 6RB
No, unfortunately the 7I84 encoder inputs are mainly for MPG use and have a maximum count rate of about 20-50 KHz and dont have an index input

Please Log in to join the conversation.

More
8 years 1 month ago #116996 by PCW
Replied by PCW on topic Hardinge super slant w/ siemens 6RB
Another option would be:

5I24 -->
7I49
7I52 (6 encoders 6 sserial ports)
1x or 2x 7I84

(this leaves one 5I24 connector free and provides 6 resolver inputs, 6 encoder inputs, 6 analog outputs and the 7I84 I/O )

Please Log in to join the conversation.

More
8 years 1 month ago #116998 by Deckerjwd
Replied by Deckerjwd on topic Hardinge super slant w/ siemens 6RB
wow they really have some option with the mesa cards, going to go read them all i think

Please Log in to join the conversation.

More
8 years 1 month ago #117062 by Deckerjwd
Replied by Deckerjwd on topic Hardinge super slant w/ siemens 6RB
is it possible to use GPIO for encoders the 5i24-16 does not have firmware for using a 7i49 and a 7i33 together. so im thinking using the 7142TA IO card for the encoders and adding a 7I44 for the slower IO MPG.

Please Log in to join the conversation.

More
8 years 1 month ago #117063 by PCW
Replied by PCW on topic Hardinge super slant w/ siemens 6RB
In general its better to use an encoder card for encoder interfaces on larger machines since they will normally use differential encoders for noise immunity

Its not a big deal to make firmware for a 7I49+7I33

How many encoder inputs do you actually need?

Please Log in to join the conversation.

More
8 years 1 month ago #117065 by Deckerjwd
Replied by Deckerjwd on topic Hardinge super slant w/ siemens 6RB
think one or 2 is there a down side to turning the whole card on?

Please Log in to join the conversation.

More
8 years 1 month ago #117441 by Deckerjwd
Replied by Deckerjwd on topic Hardinge super slant w/ siemens 6RB
cant find to much about making a bit file do i need software? would like to do it myself but maybe beyond me. think i would turn all the encoders on but dont need the analog, inless a build a y axis for the lathe. so got the serial in, so the card order would be
5I24 -->
7I49
7I33
7I44 -->
7I84 x2

Please Log in to join the conversation.

More
8 years 1 month ago #117442 by PCW
Replied by PCW on topic Hardinge super slant w/ siemens 6RB
I'll try to get one made before the end of the week
What model of the 5I24 do you have?

Please Log in to join the conversation.

More
8 years 1 month ago #117455 by Deckerjwd
Replied by Deckerjwd on topic Hardinge super slant w/ siemens 6RB
i have the 5i24-16, that would be great let me know if you need anything for that.

Please Log in to join the conversation.

More
8 years 1 month ago #117568 by PCW
Replied by PCW on topic Hardinge super slant w/ siemens 6RB
freeby.mesanet.com/5i24_16_rmsvss6_4_8.bit
7I49 P4
7I33 P3
7I44 P2

Please Log in to join the conversation.

Time to create page: 0.743 seconds
Powered by Kunena Forum