Mesa 7i76E estop

tommylight wrote: Should be easy enough to do using normal inputs tied to pause and "mesage" to alert on what axis drive faulted, but that would also need another button to reset the "enable" on the drives and be interlocked with the normal enable, or have 3 or 4 separate buttons one for each axis drive, since we have enough IO pins.

Once all errors were resolved, it would reset the pin and it would start cutting without any further action by th eoperator.

It should be possible, i am pretty sure, but i refrain from giving to much liberties to machines, do not want to one day see my plasma machines reassembled themself's as a BatleBot and are waiting for me to enter the shop !