Fastening the 7I77 to the control panel?

More
7 years 5 months ago #132851 by Catch22
Fastening the 7I77 to the control panel? was created by Catch22
When fastening the 7I77 to the control panel, do you have to fasten every hole for grounding purposes, or can I just use the 4 outside ones and 2 in the middle of the board?
Thanks Mike

Please Log in to join the conversation.

More
7 years 5 months ago #132853 by bevins
Replied by bevins on topic Fastening the 7I77 to the control panel?
It's not for grounding purposes. More for support for the connectors.

Please Log in to join the conversation.

More
7 years 5 months ago #132854 by Catch22
Replied by Catch22 on topic Fastening the 7I77 to the control panel?
OK thanks.

Please Log in to join the conversation.

More
7 years 5 months ago #132871 by bevins
Replied by bevins on topic Fastening the 7I77 to the control panel?
When mounted on these din rail mounts, there is no connection to ground.

These I get from JT. mesaus.com 3.00 each.

Attachment not found

Please Log in to join the conversation.

Time to create page: 0.078 seconds
Powered by Kunena Forum