Help me to choose a mesa board.

Friend of mine trying to retrofitting a old cnc milling machine.It have servo motors and drivers to control axis and induction motor to control umbrella tool changer.
.
What is the best mesa board and daughter board for this configuration?

DinukaShehan wrote: Friend of mine trying to retrofitting a old cnc milling machine.It have servo motors and drivers to control axis and induction motor to control umbrella tool changer.
.
What is the best mesa board and daughter board for this configuration?

We would need more details on the machine. The more details you provide the more accurate info you will receive back.

Thank you for your message.
What are the critical details what you need.
I have zero knowledge on servos.
Please

DinukaShehan wrote: Thank you for your message.
What are the critical details what you need.
I have zero knowledge on servos.
Please

I/O of the drives. +-10 velocity control, step/direction, whatever else. encoder types, etc....

Hi
what mashine is it TYPE manafacturer
IMAGE of the cabinett
WHAT controll is on like Philips/Heidenhain/okuma/Fanuc ....


in general a 7i77 will run the 90% of all rerofits
with a 7i92 eth connected you will be Network EMI save
and you can add more if you need to the board system

Is 7i77 daughter board work with 7i92 ethernet fpga board?

DinukaShehan wrote: Is 7i77 daughter board work with 7i92 ethernet fpga board?

7i77 plugs into 7i92M with a cable.

7i92M can be plugged directly to 7i77 without a cable.