Help understanding and selecting cards, 7i76E/7I96/7i95?

Spinx1 possible to use encoder encoder together?

?

How do I add an PWM to analog converter to the 7i95 and can you suggest a suitable one to use. Regards Ian.

What output voltage do you need? if 5V is enough then a simple resistor and capacitor might be enough.
If you need to isolate the voltages, you can make one:

photos.app.goo.gl/fArcfPFHFngTFK4K9

If you prefer to buy one, then look at the Mesa SpinX1
store.mesanet.com/index.php?route=produc...oduct&product_id=205