Mesa 7i76e jumper settings

Peter please can you confirm before I power the 7i76e. Re the jumper setting for W7 and W12

I have received a new board and W7 and W12 are in the up position which is opposite to what the manual says for the default.
I want to power the 7i85s with cable power on P1 So I think they should be up

I purchased these from Eusurplus together so I don't know if they have changed the jumpers from the default.

Some cards were sent out with those jumpers "UP"
And yes 'UP" is correct for powering a 7I85S

PCW wrote: Some cards were sent out with those jumpers "UP"
And yes 'UP" is correct for powering a 7I85S

I powered the 7i76e first then checked I had 5v on the correct pins on the ide cable then plugged it in . All fine