Custom 7i76e bitfile for PWM

Henk
Topic Author
Offline
Platinum Member

6 years 7 months ago #160528 by Henk

Custom 7i76e bitfile for PWM was created by Henk

Hi
Im playing around with a Wire EDM machine, see this post

forum.linuxcnc.org/30-cnc-machines/38133...edm-machine-retrofit

If I want to connect the BOB attached to my 7i76e, would i need a custom bit file to get PWM on say pins 2 and 4?

Thanks
Henk

Attachment not found

Please Log in to join the conversation.

PCW
Offline
Platinum Member

6 years 7 months ago #160594 by PCW

Replied by PCW on topic Custom 7i76e bitfile for PWM

Attachment not found

7I76E with 5ABOB on P1 with P1 DB25 pins 2 and 3
configured as PWM gens

Please Log in to join the conversation.

Henk
Topic Author
Offline
Platinum Member

6 years 7 months ago #160613 by Henk

Replied by Henk on topic Custom 7i76e bitfile for PWM

Thank you PCW.

Please Log in to join the conversation.

MARTCENT
Offline
New Member

2 years 11 months ago #286321 by MARTCENT

Replied by MARTCENT on topic Custom 7i76e bitfile for PWM

Hi Henk, were you able to retrofit Sodick?
It would help me?
Thank you

Please Log in to join the conversation.

Time to create page: 0.088 seconds