hm2_pci complaining: inconsistent Module Descriptor for UART Transmit Channel

More
6 years 6 months ago #165329 by owhite
hm2_pci complaining: inconsistent Module Descriptor for UART Transmit Channel was created by owhite
Sorry I'm having problems when after I get done making a custom bitfile and loading it on my 6i24 board. halcmd session is below and .vhd file is attached.
Code:
halcmd: loadrt hostmot2 halcmd: loadrt hm2_pci hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7 hm2_pci: discovered 5i24 at 0000:04:00.0 hm2/hm2_5i24.0: inconsistent Module Descriptor for UART Transmit Channel, not loading driver hm2/hm2_5i24.0: Version = 0, expected 0 hm2/hm2_5i24.0: NumRegisters = 4, expected 4 hm2/hm2_5i24.0: InstanceStride = 0x00000040, expected 0x00000010 hm2/hm2_5i24.0: MultipleRegisters = 0x0000000F, expected 0x0000000F hm2/hm2_5i24.0: inconsistent Module Descriptor! hm2/hm2_5i24.0: failed to parse Module Descriptor 4 hm2_5i24.0: board fails HM2 registration RTAPI_PCI: Unmapped 65536 bytes at 0x7f066fd2e000 Driver probe function failed! hm2_pci: error registering PCI driver hm2_pci: rtapi_app_main: Operation not permitted (-1) <stdin>:2: waitpid failed /usr/bin/rtapi_app hm2_pci <stdin>:2: /usr/bin/rtapi_app exited without becoming ready <stdin>:2: insmod for hm2_pci failed, returned -1

Please Log in to join the conversation.

More
6 years 6 months ago #165333 by PCW
Replied by PCW on topic hm2_pci complaining: inconsistent Module Descriptor for UART Transmit Channel
The UART requires odd register mapping that's not accommodated
by the normal IDROM info so you need to set the instance stride in
the top level file:
InstStride1: integer := 64; -- instance stride 1 = 64 bytes = 16 x 32 bit registers sserial
-- InstStride1: integer := 16; -- 4..7 16 for BSPI/UART Ick double Ick

I would suggest not using the UART and rather using the PKTUART instead

Please Log in to join the conversation.

More
6 years 6 months ago #165335 by owhite
Replied by owhite on topic hm2_pci complaining: inconsistent Module Descriptor for UART Transmit Channel
I'll try the PKTUART.

Please Log in to join the conversation.

More
6 years 6 months ago #165338 by owhite
Replied by owhite on topic hm2_pci complaining: inconsistent Module Descriptor for UART Transmit Channel
great so that loaded. PCW - could you point me to an example of using PKTUART? Basically all I want to do is send the states of pins into a serial stream.

Please Log in to join the conversation.

More
6 years 6 months ago #165394 by PCW
Replied by PCW on topic hm2_pci complaining: inconsistent Module Descriptor for UART Transmit Channel
I think there's an example component: pktgyro_test (serial coms with a gyroscope chip)
Unfortunately there in not a current clean way to have a driver with simple hal support
due to the lack of string or array support in hal

Please Log in to join the conversation.

Time to create page: 0.099 seconds
Powered by Kunena Forum