7c80 and ODROID-C4

I am planning on using a 7c80 for a mill controller upgrade project. I was wondering if the choice of an ODROID-C4 rather than a Pi 4B would a workable option? I would prefer the eMMC memory over an SD card.

Thanks,

Edward

You _might_ be able to run a 7C80 from the ODROIDs SPI port using the hm2_spi driver
but its not a given... A Ethernet connected card might be safer bet with the ODROID

So something like a 7I76E, a din rail mounted ethernet switch and power supply for the odroid?

escott wrote: So something like a 7I76E, a din rail mounted ethernet switch and power supply for the odroid?

No ethernet switch!!!
Direct connection between Mesa and PC or Odroid.
And this is from a guy that knows that will work with some switches, but it is not for controlling the machine.

I suppose USB ethernet for file transfer would be OK?

escott wrote: I suppose USB ethernet for file transfer would be OK?

Yes it will, USB WiFi also.