7C80 vs 7i96

Hello

i want to work with an raspberry pi 4
I want to use the 7C80 or the 7i96
Is there an different about the performance ?
Have someone work with the new 7C80 ?

There would be no significant difference in performance
A 7i96 would be easier to setup since there are 2 different GUI
configurators available. A 7C80 would need a hand edited hal/ini file
setup. You could start with a hal/ini file setup generated with one of
the GUI configuration utilities but a fair amount of hand editing would be needed.

Just curious, what would be the main reason to choose the 7C80 over the 7i96?

Hi

In my opinion the 7c80was mostly developed for RPI3 because does not support the ethernet realtime due to hardware design.

andypugh wrote: The Pi3 does not work with Ethernet Mesa cards as the ethernet is on the USB bus.

Ok, thank you very much !

alkabal wrote: Hi

In my opinion the 7c80was mostly developed for RPI3 because does not support the ethernet realtime due to hardware design.

andypugh wrote: The Pi3 does not work with Ethernet Mesa cards as the ethernet is on the USB bus.

Makes sense! Thank you!

snowgoer540 wrote: Just curious, what would be the main reason to choose the 7C80 over the 7i96?

Much more I/O
Isolated analog spindle interface
Doesn't tie-up RPIs Ethernet interface
Supplies mechanical mount and power for RPI
Single 8V to 40V power supply