7i96 Configuration Tool Deb

7i96 Configuration Tool

7i76e Configuration Tool

Both tools have a deb to install them and a menu item gets added to the CNC menu. I try and make the Configuration Tools as easy to use as possible and don't force you to pick a type of machine. You can configure a single axis machine if that's what you need.

If you have any issues please open an issue.
7i96 Issue Tracker
7i76e Issue Tracker

JT

I just finished adding two menu items Save Pins and Save Signals. These will get the pin and signal names and save them to a text file in your configuration directory. No more twiddling around in a terminal to get a list of all the pins and signals.

I'll push the .deb in the morning during free time... on metered time now.

JT

One of the many tools included with the 7i96 Configuration tool is the NIC speed test with which you can easily figure out if your CPU and NIC are fast enough for a Mesa Ethernet Card.



JT

On the Info tab you can find the information about the CPU and the NIC.


JT

On the Pins tab you can get the actual pin names, also note you can send the pin names and signal names to a text file from the File menu.


JT

Also on the pins tab you can see the terminal blocks and their function.


JT

On the PLC tab you can change the defaults for Classicladder.


JT

On the Options tab you can select various options.


JT

On the Outputs tab you can configure the outputs of course.


JT

On the Inputs tab you can configure the inputs


JT