Network Issue with Mesa and Wifi

More
5 years 3 months ago #213844 by Ritterchen
Network Issue with Mesa and Wifi was created by Ritterchen
Hey together,
I set up my Mesa Card accordingly to this how-to here forum.linuxcnc.org/27-driver-boards/3559...ethernet-mesa-boards

However I have still wired issues with reaching some websites (linuxcnc.org) while others work perfectly fine (LinuxCNC Forum, Google)

The checkbox of "Use this connection only for resources on its network" is enabled.

Someone has a clue what could be the issue here?


All the best
Fritz

Please Log in to join the conversation.

More
5 years 3 months ago #213870 by PCW
Replied by PCW on topic Network Issue with Mesa and Wifi
What does the command

ip a

report?

Please Log in to join the conversation.

More
5 years 3 months ago #213873 by tommylight
Replied by tommylight on topic Network Issue with Mesa and Wifi

However I have still wired issues with reaching some websites (linuxcnc.org) while others work perfectly fine (LinuxCNC Forum, Google)
Not an issue on your end, LinuxCNC site might be under maintenance or something, so if everything else works you're good.

Please Log in to join the conversation.

More
5 years 3 months ago #213879 by scotth
Replied by scotth on topic Network Issue with Mesa and Wifi
I'm having a problem with this also. I can use the internet until I start the 7i76, after that I have to restart the system for Internet.


 

Attachment not found



 

Please Log in to join the conversation.

More
5 years 3 months ago #213880 by PCW
Replied by PCW on topic Network Issue with Mesa and Wifi
Are you using wicd?

Its known to cause issues with multiple connections

Please Log in to join the conversation.

More
5 years 3 months ago #213883 by scotth
Replied by scotth on topic Network Issue with Mesa and Wifi
I'm on 2.9.0 I don't know if I'm using wicd.
I did not notice the Wi-Fi, I'm running 2 Ethernet cards. I gave up on Wi-Fi at 2.7.

 

Please Log in to join the conversation.

More
5 years 3 months ago #213888 by PCW
Replied by PCW on topic Network Issue with Mesa and Wifi
If you started with the standard 2.8.0 ISO you will have WICD installed
It needs to be replaced with Network Manager as WICD breaks configurations with multiple interfaces

Please Log in to join the conversation.

More
5 years 3 months ago #213893 by Ritterchen
Replied by Ritterchen on topic Network Issue with Mesa and Wifi
I'm running Network Manager. While I did the test I tested at the same time on another system, so I assume it should not be related to maintenance.

The output of ip a looks as following:
Code:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00     inet 127.0.0.1/8 scope host lo        valid_lft forever preferred_lft forever     inet6 ::1/128 scope host        valid_lft forever preferred_lft forever 2: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000     link/ether 00:23:24:7c:26:7d brd ff:ff:ff:ff:ff:ff     inet 10.10.10.11/24 brd 10.10.10.255 scope global eno1        valid_lft forever preferred_lft forever 3: wlx00c0ca649806: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000     link/ether 00:c0:ca:64:98:06 brd ff:ff:ff:ff:ff:ff     inet 192.168.178.60/24 brd 192.168.178.255 scope global noprefixroute wlx00c0ca649806        valid_lft forever preferred_lft forever     inet6 2003:c6:371a:7e00:6511:37a1:5c6b:762b/64 scope global dynamic noprefixroute        valid_lft 7190sec preferred_lft 1790sec     inet6 fe80::d8e8:204d:6d51:4803/64 scope link noprefixroute        valid_lft forever preferred_lft forever

Please Log in to join the conversation.

More
5 years 3 months ago #213905 by PCW
Replied by PCW on topic Network Issue with Mesa and Wifi
That actually looks OK, I would guess the problem is elsewhere

Please Log in to join the conversation.

Time to create page: 0.685 seconds
Powered by Kunena Forum