7i76e not loading

hm2: loading Mesa HostMot2 driver version 0.15 hm2_eth: loading Mesa AnyIO HostMot2 ethernet driver version 0.2 sh: 1: PATH: not found sh: 1: PATH: not found sh: 1: PATH: not found hm2_eth: 10.10.10.10: INFO: Hardware address (MAC): 00:60:1b:10:40:6c sh: 1: PATH: not found hm2_eth: discovered 7I76E-16 hm2/hm2_7i76e.0: Low Level init 0.15 hm2/hm2_7i76e.0: Smart Serial Firmware Version 43 Waiting for component 'hm2_eth' to become ready.Board hm2_7i76e.0.7i76.0.0 Hardware Mode 0 = standard .Board hm2_7i76e.0.7i76.0.0 Software Mode 0 = io_spin .Board hm2_7i76e.0.7i76.0.0 Software Mode 1 = io_ana_spin .Board hm2_7i76e.0.7i76.0.0 Software Mode 2 = io_enc_ana_spin_fv ................board fails HM2 registration hm2_eth: in hm2_eth_reset .sh: 1: PATH: not found .sh: 1: PATH: not found .hm2_eth: rtapi_app_main: Resource temporarily unavailable (-11) twopass: load_the_modules cmd=<orig_loadrt hm2_eth [concat board_ip="10.10.10.10"] [concat config=" num_encoders=3 num_pwmgens=0 num_stepgens=5 sserial_port_0=2xxxx"]> waitpid failed /home/plasma2/linuxcnc-pla/bin/rtapi_app hm2_eth /home/plasma2/linuxcnc-pla/bin/rtapi_app exited without becoming ready insmod for hm2_eth failed, returned -1 Shutting down and cleaning up LinuxCNC... hm2: unloading Note: Using POSIX realtime LinuxCNC terminated with an error.  You can find more information in the log:     /home/plasma2/linuxcnc_debug.txt