TB6600 stepper driver; step settings question

More
4 years 10 months ago #228537 by norkamus
TB6600 stepper driver; step settings question was created by norkamus
Hello. I am new here and new to making my own machine. I can't seem to find an explanation of the first 3 step settings on my TB6600 drivers. Settings "NC", "2/A" , "2/B". I am guessing the first one is "Off" or "No Current" because my motor wouldn't work on this setting. Can someone clarify these 3 settings?




Nick

Please Log in to join the conversation.

More
4 years 10 months ago #228539 by tommylight
Replied by tommylight on topic TB6600 stepper driver; step settings question
www.haoyuelectronics.com/ebay/TB6600/TB6600HQ_datasheet.pdf
Page 19 and 20

Please Log in to join the conversation.

More
4 years 10 months ago #228549 by norkamus
Replied by norkamus on topic TB6600 stepper driver; step settings question
Apologies if I posted this in the wrong area. I haven't been on a forum in 20 years. My manners probably need some polishing up.

Nick

Please Log in to join the conversation.

More
4 years 10 months ago #228551 by tommylight
Replied by tommylight on topic TB6600 stepper driver; step settings question
No worries, we can move it.

Please Log in to join the conversation.

Time to create page: 0.077 seconds
Powered by Kunena Forum