SOLVED: 7i77D + Breakout-Board: Custom Bitfile needed

More
4 years 9 months ago #230845 by freisei
7i77D + Breakout-Board: Custom Bitfile needed was created by freisei
Good Morning!

I ve tried starting to generate a custom bitfile myself, but i have no chance to run ISE Design Suite on my PC.

Maybe the Wiki-Page for generating custom bitfiles need some attention/update. Xilinx wants me to use there newer products. So until now i dont know what to download/install exactly. Tried ISE System Edition 14.7 in a Virtual Machine (which failes on my PC).

So maybe someone could be so kind and compile a custom bitfile for me?

I have a 6i25: (currently flashed 5i25_7i77_7i85sp.bit to run my 7i77D and use a PWM-Pin from P2 with a breakout-board)

My bit-wishlist:

Code:
7i77D on P3: (no changes) Configuration pin-out: IO Connections for P3 Pin#  I/O   Pri. func    Sec. func       Chan      Pin func        Pin Dir  1      0   IOPort       SSerial          0        TXEn3           (Out) 14      1   IOPort       SSerial          0        TXData3         (Out)  2      2   IOPort       SSerial          0        RXData3         (In) 15      3   IOPort       SSerial          0        TXData2         (Out)  3      4   IOPort       SSerial          0        RXData2         (In) 16      5   IOPort       SSerial          0        TXData1         (Out)  4      6   IOPort       SSerial          0        RXData1         (In) 17      7   IOPort       MuxedQCountSel   0        MuxSel0         (Out)  5      8   IOPort       MuxedQCount      0        MuxQ-A          (In)  6      9   IOPort       MuxedQCount      0        MuxQ-B          (In)  7     10   IOPort       MuxedQCount      0        MuxQ-IDX        (In)  8     11   IOPort       MuxedQCount      1        MuxQ-A          (In)  9     12   IOPort       MuxedQCount      1        MuxQ-B          (In) 10     13   IOPort       MuxedQCount      1        MuxQ-IDX        (In) 11     14   IOPort       MuxedQCount      2        MuxQ-A          (In) 12     15   IOPort       MuxedQCount      2        MuxQ-B          (In) 13     16   IOPort       MuxedQCount      2        MuxQ-IDX        (In) Breakout-Board on P2: (Pin numbers doesnt matter, i will connect as it comes out) - 2 sserial-channels - 2 stepgens - 2 pwmgens - rest should be useable for gerneral IO. (if possible, if not: sserial) IO Connections for P2 Pin#  I/O   Pri. func    Sec. func       1     17   IOPort       SSerial           14     18   IOPort       SSerial            2     19   IOPort       SSerial          15     20   IOPort       SSerial           3     21   IOPort       StepGen        16     22   IOPort       StepGen         4     23   IOPort       StepGen         17     24   IOPort       StepGen            5     25   IOPort       PWMGen           6     26   IOPort       PWMGen             7     27   IOPort       PWMGen            8     28   IOPort       PWMGen             9     29   IOPort       IO                10     30   IOPort       IO                11     31   IOPort       IO                12     32   IOPort       IO                13     33   IOPort       IO               Thanks! Greets from Bavaria.

Please Log in to join the conversation.

More
4 years 9 months ago #230858 by freisei
Replied by freisei on topic 7i77D + Breakout-Board: Custom Bitfile needed
i ve just found out that
5i25_7i77_7i78.bit nearly matches my needs.

btw:
ISE 14.7 now runs in a Virtual-Box VM. If this is the current correct way, i can rewrite the wiki-file. But there are even some errors i cant solve:
Code:
Parsing entity <TopPCIHostMot2>. ERROR:HDLCompiler:69 - "/home/ise/Z_hm2_source/TopPCIHostMot2.vhd" Line 272: <pindesc> is not declared. ERROR:HDLCompiler:69 - "/home/ise/Z_hm2_source/TopPCIHostMot2.vhd" Line 273: <moduleid> is not declared. ERROR:HDLCompiler:854 - "/home/ise/Z_hm2_source/TopPCIHostMot2.vhd" Line 269: Unit <toppcihostmot2> ignored due to previous errors. Parsing architecture <Behavioral> of entity <toppcihostmot2>. ERROR:HDLCompiler:374 - "/home/ise/Z_hm2_source/TopPCIHostMot2.vhd" Line 320: Entity <toppcihostmot2> is not yet compiled. ERROR:HDLCompiler:69 - "/home/ise/Z_hm2_source/TopPCIHostMot2.vhd" Line 323: <std_logic_vector> is not declared. ERROR:HDLCompiler:69 - "/home/ise/Z_hm2_source/TopPCIHostMot2.vhd" Line 324: <std_logic_vector> is not declared. ERROR:HDLCompiler:69 - "/home/ise/Z_hm2_source/TopPCIHostMot2.vhd" Line 325: <std_logic_vector> is not decl Greets

Please Log in to join the conversation.

More
4 years 9 months ago #230867 by D.L.
Replied by D.L. on topic 7i77D + Breakout-Board: Custom Bitfile needed
uncomment strings in TopPCIHostMot2.vhd:
Code:
--use work.i25_x9card.all;
Code:
--use work.PIN_7I77_7I78_34.all;
Or use this pin files:

Attachment not found

Code:
use work.PIN_7I77_2SS2ST2SPD_34.all; -- with dpll
or
Code:
use work.PIN_7I77_2SS2ST2SP_34.all;

Please Log in to join the conversation.

More
4 years 9 months ago #230881 by freisei
Replied by freisei on topic 7i77D + Breakout-Board: Custom Bitfile needed

uncomment strings in TopPCIHostMot2.vhd:
Code:
--use work.i25_x9card.all; [code]--use work.PIN_7I77_7I78_34.all; Or use this pin files: [attachment=42707]PIN34_FIX_PWM_DIR_OUT.zip[/attachment] [code]use work.PIN_7I77_2SS2ST2SPD_34.all; -- with dpll or [code]use work.PIN_7I77_2SS2ST2SP_34.all;
[/code][/code][/code]


 
Code:
i already uncommended --use work.i25_x9card.all;

i use my own file

use work.PIN_7I77_P2Cust01.all;

which is attached to the project libraries.


With your tip, i found the error:
use work.PIN_7I77_P2Cust01.all; was use work.PIN_7I77_P2Cust01.vhd! wrong file extension... :)


ISE is now compiling... lets see :)

Thank You!

Please Log in to join the conversation.

More
4 years 9 months ago #231056 by freisei
Replied by freisei on topic SOLVED: 7i77D + Breakout-Board: Custom Bitfile needed
... and compiling was successful. Thanks again!

Please Log in to join the conversation.

Time to create page: 0.208 seconds
Powered by Kunena Forum