Mesa 7i76e + 7i76 + 7i89 Firmware

Hello everyone,

I need the firmware for a Mesa 7i76e + 7i76 + 7i89 configuration. Any help would be much appreciated. Thanks.

Did you download the firmware from their website and check the included firmwares?
I think it is in the "specifications" tab.

Yes but I don't see a bitfile for a 7i76e + 7i76 + 7i89.

Do I need to make my own bitfile if that's the case?

You can make the firmware for sure, not sure how hard it is, though.
Or wait till PCW joins us, he is the Grand Master of everything Mesa and is very, very helpful, so he can shed some light on how to go about it.

Thanks Tommy. I'm relatively familiar with the forum as I've been using it to solve the countless issues I've had over the last couple of years. I've always been able to figure things out from other peoples posts so I haven't needed too much direct help. And I definitely know how extremely helpful PCW, yourself, and many other contributors are. I'll see if PCW can help me out. Otherwise I'll figure out the ISE software

Do you mean a 7I76E +7I76 on P1 +7I89 on P2?

A 7I76E+7I89 config is in the normal distribution

If you mean a 7I76E + added 7I76 and 7I89 on expansion ports P1 and P2, here is an appropriate bitfile:

 

Awesome! Thank you so much PCW.

And yes I am running a 7i76e with 7i76 on P1 and 7i89 on P2.