Can I use 7i96s with LCNC 2.8

zz912
Topic Author
Offline
Platinum Member

4 years 3 months ago #247185 by zz912

Replied by zz912 on topic Can I use 7i96s with LCNC 2.8

PCW wrote:
The GPIO (SB 51) and clocklow (SB 100) data are not correct for the 7I96
(so are probably not terribly important)

I dont know, what do you mean. :-(

Please Log in to join the conversation.

PCW
Away
Platinum Member

4 years 3 months ago #247189 by PCW

Replied by PCW on topic Can I use 7i96s with LCNC 2.8

I mean the values there are totally wrong for a 7I96
and since pncconf works OK for setting up 7I96 hal files
those values are unimportant

Please Log in to join the conversation.

zz912
Topic Author
Offline
Platinum Member

4 years 3 months ago #247190 by zz912

Replied by zz912 on topic Can I use 7i96s with LCNC 2.8

So I will leave it.

Can I ask for definiton of logical number? If i leave 0, I could not change GPIOI to GPIOO. If I change it to 100 it works. But it was only experiment.

Please Log in to join the conversation.

PCW
Away
Platinum Member

4 years 3 months ago #247192 by PCW

Replied by PCW on topic Can I use 7i96s with LCNC 2.8

I don't know...

You would have to find how that number is used in pncconf.

Might be a question better asked in the pncconf section

Please Log in to join the conversation.

COFHAL
Offline
Platinum Member

4 years 3 months ago #247252 by COFHAL

Replied by COFHAL on topic Error at flash 7i96s

I removed mesaflash and it already recognized version 3.4.3 and I was able to flash the card. I have version 2.9 installed. Does this card work with this version or do you need the 2.9 master?

Please Log in to join the conversation.

PCW
Away
Platinum Member

4 years 3 months ago #247257 by PCW

Replied by PCW on topic Error at flash 7i96s

2.9 as of about February of this year will work

Please Log in to join the conversation.

zz912
Topic Author
Offline
Platinum Member

4 years 3 months ago #247356 by zz912

Replied by zz912 on topic Can I use 7i96s with LCNC 2.8

I added card 7i96s to PNCconf LCNC 2.8

Analog output - works
InM - works
OutM - works - looks like:

Code:

# --- COOLANT-MIST ---
setp hm2_7i96.0.gpio.015.is_output true
net coolant-mist  =>     hm2_7i96.0.gpio.015.out

# --- COOLANT-FLOOD ---
setp hm2_7i96.0.gpio.016.is_output true
net coolant-flood  =>     hm2_7i96.0.gpio.016.out

I'm wondering what else to check.
I would like to add this modification to the official LCNC 2.8 repository. Is there any reason why not?

This is my Mesa card tester:

Attachment not found

Please Log in to join the conversation.

zz912
Topic Author
Offline
Platinum Member

4 years 3 months ago #247724 by zz912

Replied by zz912 on topic Can I use 7i96s with LCNC 2.8

Code:

 # 7i96s ####################
    ['7i96s-Internal Data', '7i96', '7i96s_d', '7i96', 'hm2_eth',
        1,3, 0,0, 1,1, 0,0, 5,2, 1,1, [],0,0,0,0,0,0,0, 1, 34, 33, 200, [1, 2, 3],
        # TAB 1
        [S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],
        [S.GPIOI, 0],[S.SSR0, 100],[S.SSR0, 101],[S.SSR0, 102],[S.SSR0, 103],[S.GPIOO, 100],[S.GPIOO, 101],
        [S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],
        # TAB 2
        [S.STEPB,0],[S.STEPA,0],[S.STEPB,1],[S.STEPA,1],[S.STEPB,2],[S.STEPA,2],[S.STEPB,3],[S.STEPA,3],[S.STEPB,4],[S.STEPA,4],
        [S.ENCA,0],[S.ENCB,0],[S.ENCI,0],[S.RXDATA0,0],[S.TXDATA0,0],[S.TXEN0,0],[S.PWMP,0],
        [S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],
        # TAB 3
        [S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],
        [S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],[S.GPIOI, 0],
        [S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],[S.NUSED,0],],

Please Log in to join the conversation.

Time to create page: 0.127 seconds