overnight no errors . Since your longer run anyway
Code:
packing@packing:~$ halcmd show param hm2*tmax*
Parameters:
Owner Type Dir Value Name
93 s32 RW 0 hm2_7i76e.0.read-request.tmax
93 bit RO FALSE hm2_7i76e.0.read-request.tmax-increased
93 s32 RW 909760 hm2_7i76e.0.read.tmax
93 bit RO FALSE hm2_7i76e.0.read.tmax-increased
93 s32 RW 489900 hm2_7i76e.0.write.tmax
93 bit RO FALSE hm2_7i76e.0.write.tmax-increased
Ping times
Code:
64 bytes from 10.10.10.10: icmp_seq=19 ttl=64 time=0.455 ms
64 bytes from 10.10.10.10: icmp_seq=20 ttl=64 time=0.425 ms
64 bytes from 10.10.10.10: icmp_seq=21 ttl=64 time=0.434 ms
64 bytes from 10.10.10.10: icmp_seq=22 ttl=64 time=0.498 ms
64 bytes from 10.10.10.10: icmp_seq=23 ttl=64 time=0.500 ms
64 bytes from 10.10.10.10: icmp_seq=24 ttl=64 time=0.510 ms
64 bytes from 10.10.10.10: icmp_seq=25 ttl=64 time=0.465 ms
^C
--- 10.10.10.10 ping statistics ---
25 packets transmitted, 25 received, 0% packet loss, time 24366ms
rtt min/avg/max/mdev = 0.245/0.465/0.698/0.074 ms
packing@packing:~$
max ping time = 0.510
Code:
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: enp3s0
Ahh, on this PC, the change to the driver actually stuck
Code:
packing@packing:~$ sudo ethtool -i enp3s0
driver: r8168
version: 8.050.03-NAPI
Something odd happened as the driver was rebuilt when I changes linux-headers, not when I installed the driver.
Then it worked...
PS. not playing with this one anymore!
