SOLVED ! 6i25(5i25) 5i25_prob_rfx2.pin doesn't match flashed bin

macsddau@linuxcnc
Topic Author
Offline
Premium Member

4 years 1 month ago #252929 by macsddau@linuxcnc

6i25(5i25) 5i25_prob_rfx2.pin doesn't match flashed bin was created by macsddau@linuxcnc

Received today a MESA 6i25

Flashed with 5i25_prob_rfx.bit file :

Code:

sudo mesaflash --device 5i25 --write '/path_to_file/5i25_prob_rfx2.bit'

I choose this configuration because it matches my current parport pin out.

Starting linuxCNC got an error :

Code:

./r993cnc_6i25.hal:25: parameter or pin 'hm2_5i25.0.gpio.000.is_output' not found

Looking for the begin of the error report I see :

Code:

hm2/hm2_5i25.0: IO Pin 000 (P3-01): StepGen #0, pin Direction (Output)
hm2/hm2_5i25.0: IO Pin 001 (P3-14): StepGen #0, pin Step (Output)
hm2/hm2_5i25.0: IO Pin 002 (P3-02): StepGen #1, pin Direction (Output)
hm2/hm2_5i25.0: IO Pin 003 (P3-15): StepGen #1, pin Step (Output)
hm2/hm2_5i25.0: IO Pin 004 (P3-03): StepGen #2, pin Direction (Output)
hm2/hm2_5i25.0: IO Pin 005 (P3-16): StepGen #2, pin Step (Output)

In the file 5i25_prob_rfx the pin out is

Code:

Pin# I/O Pri. func Sec. func Chan Pin func Pin Dir
[..]
2 2 IOPort StepGen 0 Step (Out)
[..]
3 4 IOPort StepGen 0 Dir (Out)
[..]
4 6 IOPort StepGen 1 Step (Out)
[..]
5 8 IOPort StepGen 1 Dir (Out) 6 9 IOPort StepGen 2 Step (Out)
7 10 IOPort StepGen 2 Dir (Out)
8 11 IOPort StepGen 3 Step (Out)
9 12 IOPort StepGen 3 Dir (Out)

That doesn't match

I don't want to change pinout How can I solve this ?

Attached HAL and full error report