power supply recommendation for mesa 7i76?

just starting with my diy...

can anyone recommend a good power supply for a mesa 7i76?

thanks in advance!

I would suggest Mean Well MDR.  Those are din rail mount and are considered 'good enough' for mesa card.

For 5V you can use MDR-10-5  (2A) or  MDR-20-5 (3A) . You can go as high as MDR-40-5 (6A) if you really need that much power for the 5V bus.
For 24V  I would use MDR-40-24  (1.7A). Again, this is application specific and you can go as high as you want (ex: MDR-100-24  4A)

A notch above is the Mean Well NDR or EDR series, although more expensive.

Download this pdf to learn everything you should know but were afraid to ask about Mean Well power supplies: www.meanwell.com/Upload/PDF/Short_Form_din.pdf

 

thanks for the recommendation!  those are nice little pieces of kit...  i picked up a 20-5 and a 100-24.