Mesa 7i76e & 7i85 bitfile trouble

Heisenberg
Topic Author
Offline
New Member

3 years 9 months ago #262766 by Heisenberg

Mesa 7i76e & 7i85 bitfile trouble was created by Heisenberg

Hi,

I want to use my 7i76e with an 7i85 board. I´ve changed the IP address to 10.10.10.10 and I get access to the card.

Code:

sudo mesaflash --device 7i76 --addr 10.10.10.10 --readhmid

So far, so good.Then I used mesaflash command:

Code:

sudo mesaflash --device 7i76e --addr 10.10.10.10 -- fallback --write 7i76e_7i76x1_7i85x1D.bit

The command was successfully, no errors Next command:

Code:

sudo mesaflash --device 7i76e --addr 10.10.10.10 -- fallback – reaload

But the prompted result shows no changes of the bitfile on the card. It look like before.

Code:

sudo mesaflash --device 7i76e --addr 10.10.10.10 --readhmid
Configuration Name: HOSTMOT2

General configuration information:

  BoardName : MESA7I76
  FPGA Size: 16 KGates
  FPGA Pins: 256
  Number of IO Ports: 3
  Width of one I/O port: 17
  Clock Low frequency: 100.0000 MHz
  Clock High frequency: 200.0000 MHz
  IDROM Type: 3
  Instance Stride 0: 4
  Instance Stride 1: 64
  Register Stride 0: 256
  Register Stride 1: 256

Modules in configuration:

  Module: DPLL
  There are 1 of DPLL in configuration
  Version: 0
  Registers: 7
  BaseAddress: 7000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: WatchDog
  There are 1 of WatchDog in configuration
  Version: 0
  Registers: 3
  BaseAddress: 0C00
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: IOPort
  There are 3 of IOPort in configuration
  Version: 0
  Registers: 5
  BaseAddress: 1000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: StepGen
  There are 5 of StepGen in configuration
  Version: 2
  Registers: 10
  BaseAddress: 2000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: QCount
  There are 1 of QCount in configuration
  Version: 2
  Registers: 5
  BaseAddress: 3000
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

  Module: SSerial
  There are 1 of SSerial in configuration
  Version: 0
  Registers: 6
  BaseAddress: 5B00
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 64 bytes

  Module: LED
  There are 1 of LED in configuration
  Version: 0
  Registers: 1
  BaseAddress: 0200
  ClockFrequency: 100.000 MHz
  Register Stride: 256 bytes
  Instance Stride: 4 bytes

Configuration pin-out:

IO Connections for on-card -> 7I76
Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir

TB2-4,5                 0   IOPort       StepGen          0        Dir/Table2      (Out)
TB2-2,3                 1   IOPort       StepGen          0        Step/Table1     (Out)
TB2-10,11               2   IOPort       StepGen          1        Dir/Table2      (Out)
TB2-8,9                 3   IOPort       StepGen          1        Step/Table1     (Out)
TB2-16,17               4   IOPort       StepGen          2        Dir/Table2      (Out)
TB2-14,15               5   IOPort       StepGen          2        Step/Table1     (Out)
TB2-22,23               6   IOPort       StepGen          3        Dir/Table2      (Out)
TB2-20,21               7   IOPort       StepGen          3        Step/Table1     (Out)
TB3-4,5                 8   IOPort       StepGen          4        Dir/Table2      (Out)
TB3-2,3                 9   IOPort       StepGen          4        Step/Table1     (Out)
Internal-Field-IO      10   IOPort       SSerial          0        TXData0         (Out)
Internal-Field-IO      11   IOPort       SSerial          0        RXData0         (In)
TB3-18,19              12   IOPort       SSerial          0        TXData1         (Out)
TB3-16,17              13   IOPort       SSerial          0        RXData1         (In)
TB3-13,14              14   IOPort       QCount           0        Quad-IDX        (In)
TB3-10,11              15   IOPort       QCount           0        Quad-B          (In)
TB3-7,8                16   IOPort       QCount           0        Quad-A          (In)

IO Connections for P1
DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir

 1                     17   IOPort       None           
14                     18   IOPort       None           
 2                     19   IOPort       None           
15                     20   IOPort       None           
 3                     21   IOPort       None           
16                     22   IOPort       None           
 4                     23   IOPort       None           
17                     24   IOPort       None           
 5                     25   IOPort       None           
 6                     26   IOPort       None           
 7                     27   IOPort       None           
 8                     28   IOPort       None           
 9                     29   IOPort       None           
10                     30   IOPort       None           
11                     31   IOPort       None           
12                     32   IOPort       None           
13                     33   IOPort       None           

IO Connections for P2
DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir

 1                     34   IOPort       None           
14                     35   IOPort       None           
 2                     36   IOPort       None           
15                     37   IOPort       None           
 3                     38   IOPort       None           
16                     39   IOPort       None           
 4                     40   IOPort       None           
17                     41   IOPort       None           
 5                     42   IOPort       None           
 6                     43   IOPort       None           
 7                     44   IOPort       None           
 8                     45   IOPort       None           
 9                     46   IOPort       None           
10                     47   IOPort       None           
11                     48   IOPort       None           
12                     49   IOPort       None           
13                     50   IOPort       None     

I used the tutorial from Peter / Talla83 to do this. Now I have some Questions:1) Which Bit file is correct for my combination?2) Are there any changes on the jumpers on the Mesa card to do? Especially with Jumper W9? Actually it is factory layout3) Can anybody of you help me with this? Thanks a lot!

Marcus

Please Log in to join the conversation.

PCW
Offline
Platinum Member

3 years 9 months ago #262767 by PCW

Replied by PCW on topic Mesa 7i76e & 7i85 bitfile trouble

A reasonable command set would be:

mesaflash --device 7i76e --addr 10.10.10.10 --write 7i76e_7i76x1_7i85x1D.bit
mesaflash --device 7i76e --addr 10.10.10.10 --reload
mesaflash --device 7i76e --addr 10.10.10.10 --readhmid

Please Log in to join the conversation.

Heisenberg
Topic Author
Offline
New Member

3 years 9 months ago #262768 by Heisenberg

Replied by Heisenberg on topic Mesa 7i76e & 7i85 bitfile trouble

Thank you!!!!

it works :-)

Code:

Configuration pin-out:

IO Connections for on-card -> 7I76
Pin#                  I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir

TB2-4,5                 0   IOPort       StepGen          0        Dir/Table2      (Out)
TB2-2,3                 1   IOPort       StepGen          0        Step/Table1     (Out)
TB2-10,11               2   IOPort       StepGen          1        Dir/Table2      (Out)
TB2-8,9                 3   IOPort       StepGen          1        Step/Table1     (Out)
TB2-16,17               4   IOPort       StepGen          2        Dir/Table2      (Out)
TB2-14,15               5   IOPort       StepGen          2        Step/Table1     (Out)
TB2-22,23               6   IOPort       StepGen          3        Dir/Table2      (Out)
TB2-20,21               7   IOPort       StepGen          3        Step/Table1     (Out)
TB3-4,5                 8   IOPort       StepGen          4        Dir/Table2      (Out)
TB3-2,3                 9   IOPort       StepGen          4        Step/Table1     (Out)
Internal-Field-IO      10   IOPort       SSerial          0        TXData0         (Out)
Internal-Field-IO      11   IOPort       SSerial          0        RXData0         (In)
TB3-18,19              12   IOPort       SSerial          0        TXData1         (Out)
TB3-16,17              13   IOPort       SSerial          0        RXData1         (In)
TB3-13,14              14   IOPort       MuxedQCount      2        MuxQ-IDX        (In)
TB3-10,11              15   IOPort       MuxedQCount      2        MuxQ-B          (In)
TB3-7,8                16   IOPort       MuxedQCount      2        MuxQ-A          (In)

IO Connections for P1
DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir

 1                     17   IOPort       SSerial          0        RXData6         (In)
14                     18   IOPort       SSerial          0        TXData6         (Out)
 2                     19   IOPort       SSerial          0        RXData5         (In)
15                     20   IOPort       SSerial          0        TXData5         (Out)
 3                     21   IOPort       SSerial          0        RXData4         (In)
16                     22   IOPort       SSerial          0        TXData4         (Out)
 4                     23   IOPort       SSerial          0        RXData3         (In)
17                     24   IOPort       SSerial          0        TXData3         (Out)
 5                     25   IOPort       SSerial          0        RXData2         (In)
 6                     26   IOPort       SSerial          0        TXData2         (Out)
 7                     27   IOPort       MuxedQCountSel   0        MuxSel0         (Out)
 8                     28   IOPort       MuxedQCount      0        MuxQ-A          (In)
 9                     29   IOPort       MuxedQCount      0        MuxQ-B          (In)
10                     30   IOPort       MuxedQCount      0        MuxQ-IDX        (In)
11                     31   IOPort       MuxedQCount      1        MuxQ-A          (In)
12                     32   IOPort       MuxedQCount      1        MuxQ-B          (In)
13                     33   IOPort       MuxedQCount      1        MuxQ-IDX        (In)

IO Connections for P2
DB25 pin#             I/O   Pri. func    Sec. func        Chan     Sec. Pin func   Sec. Pin Dir

 1                     34   IOPort       None           
14                     35   IOPor

Please Log in to join the conversation.

Time to create page: 0.409 seconds