7i92m + 7i77 + 5ABoB =

More
3 years 8 months ago #264270 by Tesremos
7i92m + 7i77 + 5ABoB = was created by Tesremos
My frankenstine machine...

So one of my analog servos has kicked the bucket.. and i wish to replace it with a step/dir controlled servo

but i cant output stepgens from the 7i77.. ? can i?

so i'd like to put a 5Abob on the P2 of the 7i92m, and break out some step gens.

Can any one point me to a firmware.bit that will put some stepgens on p2, and a 7i77 on p1?

thank you in advance.

Please Log in to join the conversation.

More
3 years 8 months ago #264311 by PCW
Replied by PCW on topic 7i92m + 7i77 + 5ABoB =
Do you mean 7I77 on P2 (Male DB25) and 5ABOB on P1 (26 HDR)?
That would be more normal (7I77 on P2 = first I/O connector)

Please Log in to join the conversation.

More
3 years 8 months ago #264321 by Tesremos
Replied by Tesremos on topic 7i92m + 7i77 + 5ABoB =
err.. yes :D

Please Log in to join the conversation.

More
3 years 8 months ago #264326 by PCW
Replied by PCW on topic 7i92m + 7i77 + 5ABoB =
 

Attachment not found

Please Log in to join the conversation.

More
3 years 8 months ago #264328 by Tesremos
Replied by Tesremos on topic 7i92m + 7i77 + 5ABoB =
Your a legend

Please Log in to join the conversation.

More
3 years 8 months ago #264330 by Tesremos
Replied by Tesremos on topic 7i92m + 7i77 + 5ABoB =
Your a legend

Please Log in to join the conversation.

More
3 years 8 months ago #264333 by tommylight
Replied by tommylight on topic 7i92m + 7i77 + 5ABoB =

Your a legend
Once more, he absolutely and unequivocally deserves it!

Please Log in to join the conversation.

Time to create page: 0.210 seconds
Powered by Kunena Forum