Need help to get MESA 7i95T PWM output to work.

I only need 3 axis and 1 PWM to work, can anyone please point me how to config 7i95T card to change unuse StepGen to PwnGen
Debian 12 (bookworm)
LinuxCNC 2.9.0
mesaflash rebuilt from source to get support for MESA 7i95T
any help appreciated.

 

You need to upload a new bit file  Flash bit file  
sudo mesaflash --device 7i95t --addr 10.10.10.10 --write name_of_the_bitfile
sudo mesaflash --device 7i95t --addr 10.10.10.10 --reload
sudo mesaflash --device 7i95t --addr 10.10.10.10 --readhmid
to read the pins

I think @PCW there should be a compiled file for you

thank you very much.