need Bitfile for MESA 7i93+7i54+7i73TA

More
3 years 6 months ago #270180 by bassti
need Bitfile for MESA 7i93+7i54+7i73TA was created by bassti
Hello,

i'm about to retrofit my Mitsubishi Movemaster 2 with Linuxcnc.

I cant find a Bitfile for the following configuration: MESA 7i93 + 7i54 + 7i73TA ....

can anyone help me ?

thanks
bassti

Please Log in to join the conversation.

More
3 years 6 months ago #270185 by tommylight
Replied by tommylight on topic need Bitfile for MESA 7i93+7i54+7i73TA
Moved to "driver boards"

Please Log in to join the conversation.

More
3 years 6 months ago #270222 by PCW
Replied by PCW on topic need Bitfile for MESA 7i93+7i54+7i73TA
I'll try and get to this the next week, the boss says
I need to work on the garden this weekend...

Please Log in to join the conversation.

More
3 years 5 months ago #270445 by PCW
Replied by PCW on topic need Bitfile for MESA 7i93+7i54+7i73TA
7I93 firmware for one 7I54:
( 7I37 just uses GPIO so needs no specific support )

Attachment not found

Please Log in to join the conversation.

More
3 years 5 months ago #270460 by bassti
Replied by bassti on topic need Bitfile for MESA 7i93+7i54+7i73TA
Hi PCW,

thank you for your quick response and the Bitfile ....

bassti

Please Log in to join the conversation.

Time to create page: 0.176 seconds
Powered by Kunena Forum