Ref: Mesa ethernet setup for 7i92, 7i96, 7i76E and other ethernet Mesa boards.

Ref topic: Mesa ethernet setup for 7i92, 7i96, 7i76E and other ethernet Mesa boards.
forum.linuxcnc.org/27-driver-boards/3559...ethernet-mesa-boards

The above topic is locked so I can't reply to it but this is an additional step if you are using WiFi or other additional nework connection:

When editing the Mesa ethernet connection as per the original topic instructions, click on 'Routes' and select 'Use this connection only for resources on its network'.

This will stop other network request (Firefox etc) from trying to route through the Mesa card.

Thank you Fletch.
It was there, but it appears i removed it when i edited the original post.
I will add that later.