7I84 Max Input Frequency

More
3 years 1 month ago #281531 by nwallace
7I84 Max Input Frequency was created by nwallace
I have a situation where I need to be able to read a 24v sensor up to about 1000hz. Does anyone know if the inputs on a 7I84 are capable of reading that?

Please Log in to join the conversation.

More
3 years 1 month ago #281535 by rodw
Replied by rodw on topic 7I84 Max Input Frequency
the manual says 10 kHz (10,000 Hz)

Please Log in to join the conversation.

More
3 years 1 month ago #281536 by nwallace
Replied by nwallace on topic 7I84 Max Input Frequency
Thanks! I looked through it and just didn't see it.

Please Log in to join the conversation.

More
3 years 1 month ago #281551 by tommylight
Replied by tommylight on topic 7I84 Max Input Frequency
10KHz would require a 100000ns servo period, i have gone to 250000 and that worked perfectly through Ethernet and PCI-E.

Please Log in to join the conversation.

More
3 years 1 month ago #281564 by rodw
Replied by rodw on topic 7I84 Max Input Frequency
I nearly said earlier that you might be better off using an encoder input which is what is done when using a THCAD.
You can scale the resulting velocity in hal
That way its not dependent on the servo thread.

Please Log in to join the conversation.

More
3 years 1 month ago #281567 by tommylight
Replied by tommylight on topic 7I84 Max Input Frequency

I nearly said earlier that you might be better off using an encoder input which is what is done when using a THCAD.
I thing PCW mentioned that can do 10MHz, i have tested a bit over 1MHz, did not have anything faster. :(

Please Log in to join the conversation.

More
3 years 1 month ago #281605 by micges
Replied by micges on topic 7I84 Max Input Frequency
7i84 will easily read 4kHz input with 5i25

Please Log in to join the conversation.

Time to create page: 0.082 seconds
Powered by Kunena Forum