Mesa 7i76 Frimware

Hello together,

I am trying to update my Mesa 7i76 but unfortunately I get the following error. Does anyone have a solution

ove 7I76 W3 to right hand position
cycle 7I76 field power and hit return

halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by halcmd)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by halcmd)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by halcmd)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by halcmd)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by halcmd)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by halcmd)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by /lib/liblinuxcncini.so.0)
halcmd: /opt/Xilinx/14.7/ISE_DS/ISE/lib/lin64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /lib/liblinuxcncini.so.0)
Note: Using POSIX realtime
now move 7I76 W3 to the left hand position
and cycle field power



 

What command did you use to update the 7I76 firmware?

Xilinx tools are not related in any way to updating the 7I76 firmware

Also you should only update 7I76 firmware if LinuxCNC complains about the 7I76 firmware version

The problem was due to old dependencies I had set in my .bashrc file.