LitexCNC: firmware and driver for 5A-75B and 5A-75E

More
1 year 10 months ago #317172 by Lisov_R
Replied by Lisov_R on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
I just ordered this board and am gathering information. Has anyone tried flashing it with the USB-Altera-Blaster STM-32?

Please Log in to join the conversation.

More
1 year 10 months ago #317173 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
After using a USB-blaster and a ft2232 board, Ive found the ft2232 board to be the more reliable.
After messing around with the colorlight boards I found they needed quite a bit of rework for use.
So I went with a Spartan 6 dev board and some custom boards and I was able to use Mesa 7c81 firmware built to suit.

Please Log in to join the conversation.

More
1 year 10 months ago #317174 by Lisov_R
Replied by Lisov_R on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
You can link to this project.

Please Log in to join the conversation.

More
1 year 10 months ago #317176 by Cant do this anymore bye all
Replied by Cant do this anymore bye all on topic LitexCNC: firmware and driver for 5A-75B and 5A-75E
github.com/ozzyrob/Linuxcnc-FPGA

Please Log in to join the conversation.

Time to create page: 0.104 seconds
Powered by Kunena Forum